Network Analyzer

Suitable for radio, television,telecommunication,radar etc.Feedback system testing and ideal for higher education RF experiments Suitable for radio, television,  telecommunication, radar etc. Feedback system testing and ideal for higher education RF Microwave teaching experimentsΩAfter selection can test the 50Ω, 75Ω, 100ΩOptional time domain fault orientation function can check the fault location of co-axial cable in the feedback system. Testing range is 0-1200m, orientation true. The resolution is about 3mm when the length about 10m, the resolution is 1 cm when the length is about 30mMatch the relevant testing accessory (impedance transformer, difference bridge etc) can test the transmission line's characteristic impedance, insertion loss, time-lapse, phase shift etc. Specifications of the coaxial cable, twisted pair, coaxial connector and transmission line. It can also be used to detect the therefore cable's leakage and shield capability.Relevant probe, can test the permittivity constant of the relevant liquid, plane solid and powder etc.Test Capability: Can do a full-span, List Scan and Point frequency scan.Test Function: Can test the Transmission parameters (the amplitude-frequency characteristics, insertion loss, amplifier gain, antenna gain, group delay, option for the antenna orientation chart measurement) and Reflection testing (test standing wave, return loss, impedance, reflection phase, electric length, display the smith circuital chart function, opt permitivity and testing function), time domain fault orientation functionTest Format: Display as the logarithm amplitude and the amplitude phase at the same time. Reflection testing displays the logarithm display, standing wave ratio display, the Smith Chart Circuital displayDisplay Output: 5" CRT Kinescope displayRecord Device: Printer or USB Disc.CHARACTERISTICSSignal sourceFrequency span: 30 ~ 3200MHzFrequency accuracy: 10-5Resolution of Frequency: 0.025MHzDisplayThe Resolution of Insertion-loss: The indeterminacy of 0.01dB/div is 4% of 0.2dB ±dB in 50dBThe resolution of reflection: The indeterminacy of 0.002 is 0.01(the surplus standing wave is 1.02)The resolution of phase: 0.1°, the indeterminacy is about 5° /divMeasurement characteristicFrequency range: 30-3200MHzThe bate of the mixed wave: 40dBGroup delay: 1ns-40µsTime-domain fault orientation: 0~1200 m divided 9 degreeTest Antenna orientation chart(option): 1° one record (totally 361 dot)Dynamic rangeInsertion loss: 80dBReturn loss: 50dBGain: -20-30dBPort -CharacteristicReflection bridge direction: ≥ 35dBLoad return loss: ≥ 40dBTesting port: ATN 3021: N type single channel                        ATN 3022: N type dual channelStandard accessory: 50 N kitOptional accessory: 75 N testing kit, SMA testing kit, TV frequency modulation anti-interfere special bridge

Network Analyzer